New Cif Perfect Finish Mould Stain Removal Spray has been scientifically designed to remove mould stains and leave sparkling results on a range of surfaces. It’s ideally suited to use on baths, toilets, showers, tiled walls, and grout. It’s also highly effective on outdoor surfaces such as garden furniture and play equipment.
Cif Perfect Finish Mould Stain Removal Spray contains bleach to effectively clean a variety of surfaces around your home, leaving them beautifully shiny. It works hard to remove not only mould stains, but tea, wine and, mildew stains too. Use this spray to free your surfaces from mould and messy stains, and to restore them to their clean and sparkling best.
How to use: • Spray the intended surface from a distance of 10-15cm and leave it to act for 15-20 minutes. Leave the room during this time. Rinse the treated area with water or let the product dry. • Do not remove the mould before spraying to prevent dispersal of dangerous spores. In case of heavy contamination: wait until the surface is rinsed or dry, then repeat the steps above. • Avoid excessive spraying: surfaces should only be lightly sprayed. • Test the product on a small area before use to see the reaction of the surface. • Only use in well-ventilated areas to avoid irritation of eyes or throat. Spray must not be inhaled or allowed to come into contact with skin or eyes. If any irritation is experienced, stop using it immediately and leave the room to allow the product to dry. • Cif Mould Stain Remover is not suitable for anodized aluminium or linoleum. • If in doubt, try the product on an inconspicuous place first. • Testing on an inconspicuous place is recommended for new, unusual or coloured surfaces, painted wood or metal, vinyl, low quality or damaged plated metal chromium, or damaged surfaces.